![]() ![]() In particular, do not change settings in the Chipset screen without a good reason. The best advice is to alter only settings that you thoroughly understand. You can restart by either using the ON/OFF switch, the RESET button or by pressing Ctrl-Alt- Delete. You can invoke this override by immediately pressing Insert when you restart your computer. If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the Phoenix Technologies AwardBIOS supports an override to the CMOS settings that resets your system to its default configuration. To exit the Help Window press Esc or the F1 key again. Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. Save all the CMOS changes, only for Main Menu Load the default CMOS RAM value from BIOS default table, only for Option Page Restore the previous CMOS value from CMOS, only for Option Page Setup Menu PRESS F1 TO CONTINUE, CTRL-ALT-ESC OR DEL TO ENTER SETUP If you do not press the keys at the correct time and the system does not boot, an error message appears and you are again asked to You may also restart by simultaneously pressing Ctrl-Alt-Del. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or by pressing the RESET button on the system case. TO ENTER SETUP BEFORE BOOT PRESS CTRL-ALT-ESC OR DEL KEY By pressing Del or by pressing Ctrl-Alt-Esc when the following message appears briefly at the bottom of the screen during POST: ![]() By pressing Del immediately after switching the system on, orĢ. The BIOS launches the operating system and hands control of system operations to it.ĭuring POST, you can start the Setup program in one of two ways:ġ. When these preliminaries are finished, the BIOS seeks an operating system on one of the data storage devices (hard drive, floppy drive, etc.). The BIOS reads system configuration information in CMOS RAM and begins the process of checking out the system and configuring it through the power-on self test (POST). The Phoenix Technologies AwardBIOS is immediately activated when you first turn on the computer. The rest of this manual is intended to guide you through the process of configuring your system using Setup. The Phoenix Technologies AwardBIOS has been customized by adding important, but nonstandard, features such as virus and password protection, power management, and detailed fine-tuning of the chipset controlling the system. The BIOS provides critical low-level support for the system central processing, memory, and I/O subsystems. It supports Intel x86 and compatible processors. The Phoenix Technologies AwardBIOS in your computer is a customized version of an industrystandard BIOS for IBM PC AT-compatible personal computers. The settings are then stored in a dedicated battery-backed memory, called CMOS RAM, that retains the information when the power is turned off. The Setup program lets you modify basic system configuration settings. This manual describes the Phoenix Technologies AwardBIOS Setup program. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |